sewerin EX-TEC SNOOPER H, Руководство по эксплуатации

Страница: 15 / 35

13
3.0 3.0
3.0 3.0 3.0
Charging technique Charging technique
Charging technique Charging technique Charging technique
☞
The The
The The The
EX-TEC® SNOOPER H
must not be recharged in an must not be recharged in an
must not be recharged in an must not be recharged in an must not be recharged in an
explosive gas atmosphere ! explosive gas atmosphere ! explosive gas atmosphere ! explosive gas atmosphere ! explosive gas atmosphere !
When fully charged the detector has a
maximum maximum
maximum maximum maximum of 8 hours'
operating time.
For charging you need the HS charging adapter HS charging adapter HS charging adapter HS charging adapter HS charging adapter (see illustration),
which can be used either in the workshop or in the standby vehicle.
The following items can be connected to
the side of the charging adapter:
l
230 V mains power pack
≈
,
l
12 V= vehicle adapter,
l
24 V= vehicle adapter.
A maximum of 3 charging adapters with no
socket can be connected to the charging
adapter with a socket.
The detector has a microprocessor-controlled heuristic operating-
hours account.
If the detector is not stored in the charging adapter the NiCd battery
will spontaneously discharge.
In order to verify the capacity of the NiCd battery we recommend
you to operate the detector until the undervoltage alarm is triggered
(the detector automatically switches off), then recharge it. The
available battery capacity is now determined.