sewerin EX-TEC SNOOPER H, Руководство по эксплуатации

Страница: 16 / 35

14
Charging Charging Charging Charging Charging
Place the
EX-TEC® SNOOPER H
(switched off) in the charging
adapter. They are connected via the charging contacts (item 7) and
the adapter contacts (item 2 in the illustration on page 14). An
acoustic signal sounds to indicate the start of charging.
The charging period required is calculated from the operating
hours and a display of the following type appears:
l
the detector has 5 operating hours left (=
5 bars) and will take 3 hours to become
fully charged
l
if it is fully charged all the bars are visible
and the number display disappears
l
the detector can be left in the charger
until it is next needed
Spontaneous discharge Spontaneous discharge
Spontaneous discharge Spontaneous discharge Spontaneous discharge
If the detector is not connected to the charger when switched off,
the nickel-cadmium battery spontaneously discharges, thus
reducing the available operating hours.
☞
Short periods of operation and prolonged disuse Short periods of operation and prolonged disuse Short periods of operation and prolonged disuse Short periods of operation and prolonged disuse Short periods of operation and prolonged disuse
may lead in the long term to the so-called "memory may lead in the long term to the so-called "memory may lead in the long term to the so-called "memory may lead in the long term to the so-called "memory may lead in the long term to the so-called "memory
effect", in which the display indicates a higher battery effect", in which the display indicates a higher battery effect", in which the display indicates a higher battery effect", in which the display indicates a higher battery effect", in which the display indicates a higher battery
capacity than is actually available. capacity than is actually available. capacity than is actually available. capacity than is actually available. capacity than is actually available.
This can be avoided by fully discharging the detector This can be avoided by fully discharging the detector This can be avoided by fully discharging the detector This can be avoided by fully discharging the detector This can be avoided by fully discharging the detector
regularly (e.g. once a month), leaving it switched on regularly (e.g. once a month), leaving it switched on regularly (e.g. once a month), leaving it switched on regularly (e.g. once a month), leaving it switched on regularly (e.g. once a month), leaving it switched on
until it automatic until it automatic until it automatic until it automatic until it automatically switches off, then recharging it ally switches off, then recharging it ally switches off, then recharging it ally switches off, then recharging it ally switches off, then recharging it !!!!!