SEW-Eurodrive MOVITRAC LTP-B, Краткое руководство по эксплуатации, Страница: 40 / 48

6
Operation
Inverter status
Compact Operating Instructions – MOVITRAC
®
LTP-B
40
Message
7-segment dis-
play
Message
Full text dis-
play
Description
Auto-t Auto-tuning An automatic measurement of the motor parameters is being per-
formed. This process can take up to 2 minutes.
. . . . . .
(flashing dots) OL (= Over-
Load)
The output current of the inverter exceeds the current value entered in
P1-08 . The inverter monitors the extent and the duration of the over-
load. The inverter triggers error message "I.t-trP", depending on the
overload.
. .
(alternately flash-
ing dots)
ML (=Main
Loss)
Phase failure or supply voltage outside of specification
FirE Fire mode Fire mode/emergency mode activated. The message is displayed al-
ternately with the current operating state.
dELAy.t Delay-t Time-delayed reset for i.t-trP, O-I, hO-I, OI-b, see also error descrip-
tion O-I. (→
2 41)
Select lan-
guage
List to select one of the available languages. To select a language,
use the <Navigate> key.
Ho-run Ho-run Reference travel started. Wait until the inverter has reached the refer-
ence position. After successful reference travel, "Stop" appears on the
display.
6.1.3 Fault reset
You can reset an error in the event of an error response (see section "Error codes") by
pressing the <Stop> key or with a rising edge at digital input 1.
26879778/EN – 03/2021