SEW-Eurodrive MOVITRAC LTP-B, Краткое руководство по эксплуатации

Страница: 29 / 48

5
Startup
User interface
Compact Operating Instructions – MOVITRAC
®
LTP-B
29
5.1.2 Resetting parameters to default settings
The following preconditions must be satisfied for the parameters to be reset to the fac-
tory setting:
• The inverter must not be enabled.
• The inverter must not be in fire mode/emergency mode.
• The display of the inverter must show "Inhibit".
1. Press the 3 keys , , and simultaneously for at least 2 sec.
"P-deF" appears on the display.
2. Press the key to acknowledge the "P-deF" message.
5.1.3 Key combinations
Function The device
displays: Press: Result Example
Quick parameter
group selection
1)
Px-xx <Navigate> + <Up> keys
+
The next higher param-
eter group is selected. "P1-10" is displayed:
• Press the <Navigate> + <Up> keys.
• Now, "P2-01" is displayed.
Px-xx <Navigate> + <Down> keys
+
The next lower parame-
ter group is selected. "P2-26" is displayed:
• Press the <Navigate> + <Down> keys.
• "P1-01" is now displayed.
Selection of the
lowest group pa-
rameter Px-xx <Up> + <Down> keys
+
The first parameter of a
group is selected. "P1-10" is displayed:
• Press the <Up> + <Down> keys.
• "P1-01" is now displayed.
Set the parame-
ter to the lowest
value Numerical
value (when
changing a pa-
rameter value) <Up> + <Down> keys
+
The parameter is set to
the lowest value. When changing P1-01 :
• "50.0" is displayed.
• Press the <Up> + <Down> keys.
• "0.0" is now displayed.
Changing indi-
vidual digits of a
parameter value Numerical
value (when
changing a pa-
rameter value) <Stop/reset> + <Navigate>
keys
+
The individual parame-
ter digits can be modi-
fied. When changing P1-10 :
• “0” is displayed.
• Press the <Stop/reset> + <Navigate> keys.
• "_0" is now displayed.
• Press the <Up> key.
• "10" is now displayed.
• Press the <Stop/reset> + <Navigate> keys.
• "_10" is now displayed.
• Press the <Up> key.
• "110" is now displayed
etc.
Switching lan-
guages Select lan-
guage <Start> and <Up>
+
The desired language
can be selected now. • English
• German
• French
• Spanish
• Portuguese
• Russian
• Swedish
• Norwegian
• Finnish
Fan and display
test The complete
display lights
up Hold all the keys down at the
same time The display can be
checked for possible
damage.
The function of the fans
can be checked. This can be checked during maintenance.
1) Parameter group access must be activated: Set P1-14 to "101" or "201".
5.1.4 LT Shell engineering software
The LT Shell software enables simple and fast startup of the inverters. It can be down-
loaded from the SEW‑EURODRIVE website. After installation of the software, perform
software updates at regular intervals.
26879778/EN – 03/2021