SEW-Eurodrive MOVIPRO PHE Series, Руководство по эксплуатации, Страница: 85 / 100

10
Technical data
Output data
Operating Instructions – MOVIPRO
®
PHE..B-A15-.1X0..B-00
85
10.4 Output data
The device outputs have the following technical data:
General
Operating mode S1 (IEC 60034‑1)
Nominal output current I
N
AC 4 A
Minimum permitted braking
resistance (4Q operation) 150 Ω
Axis data
Nominal output power (at
f
PWM
= 8 kHz)
1.5 kW
Nominal output power (at
f
PWM
= 16 kHz)
0.9 kW
Current limiting AC 6 A, motor
Duration depending on the utilization
Output voltage 3 × AC 0 – 500 V
PWM frequency Selectable: 16/8/4 kHz or 8/4 kHz or 4 kHz
Motor protection TH
Maximum motor cable length 3 m
Possible brake voltage with 3-
wire brake 120 V, 230 V (recommended), 400 V
Maximum brake holding cur-
rent (of 2-wire brake variant) DC 0.41 A
Output voltage of brake con-
trol (of 2-wire brake variant) DC value ≙ 0.45 × (V
Ly
- V
Lz
)
NOTICE
Total current of the external 24 V consumers too high
Device damage
• Ensure that the total current of all external 24 V consumers does not exceed
500 mA.
24 V voltage supply of RS485 interface
Nominal voltage DC 24 V +20%/-15%
Nominal current Maximum DC 500 mA
X5502
Nominal voltage DC 24 V +20%/-15%
Nominal current Maximum DC 500 mA
The DC 24 V input voltage must comply with DIN EN 61131-2.
The DC 24 V output voltage complies with DIN EN 61131-2.
23576855/EN – 10/2017