SEW-Eurodrive MOVIPRO PHE Series Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 100

SEW-Eurodrive MOVIPRO PHE Series Скачать руководство пользователя страница 27

5

Mechanical installation

Requirements

Operating Instructions – MOVIPRO

®

PHE..B-A15-.1X0..B-00

27

5

Mechanical installation

5.1

Requirements

WARNING

Risk of crushing if the load falls.

Severe or fatal injuries.

•

Do not stand under the load.

•

Secure the area where loads can fall down.

NOTICE

Risk of collision.

Damage to plant and device components.

•

Always position the device so that it will not collide with other components,
design elements or persons along the travel path.

Comply with the following prerequisites:

•

Trained specialists perform the installation.

•

The information provided in the technical data and the permitted conditions for the
operating location of the device are observed.

•

The minimum clearance and the required gaps for using a mounting plate are
complied with. For further information, refer to chapter Minimum clearance.

•

The device is only mounted using the intended mounting options.

•

The selection and dimensioning of the mounting and locking elements are in line
with the applicable standards, the technical data of the devices and the local re-
quirements.

•

The bore dimensions are calculated in line with the respective type of fixture. For
further information, refer to chapter Assembly.

•

The mounting and locking elements fit into the existing bores, threads and counter-
sinks.

•

All display and actuator elements are visible and accessible after installation.

23576855/EN – 10/2017

«
...
25
26
27
28
29
...
»

Содержание MOVIPRO PHE Series





































































































Отзывы:

Нет отзывов