SEW-Eurodrive MOVIPRO PHE Series, Руководство по эксплуатации, Страница: 47 / 100

6
Electrical installation
Electrical connections
Operating Instructions – MOVIPRO
®
PHE..B-A15-.1X0..B-00
47
No. Name Function
1 +R Brake resistor (+)
2 -R Brake resistor (-)
3 PE PE connection
4 M Message rail connection
5 L
X/M
Line connection phase X/jumper to signal contact con-
trol
This phase is used for the signal output.
6 L
Y
Line connection phase Y
7 L
Z
Line connection phase Z
8 C2/n.c. Control input C2 (for device variant PHE..B-..-.1X0.2..)/
Not assigned
9 C1 Control input C1
Connection recommendation
INFORMATION
Phase L1, phase L2 or phase L3 can be connected to the control input C1 independ-
ent of phase L
X/M
. For further information, refer to chapter "Technical data" (→ 2 82).
The phase that is connected to LX/M is output at the signal output. Select the connec-
tion assignment from the following recommendations depending on the desired signal
phase:
L
X/M
L
Y
L
Z
L1 L2 L3
L2 L3 L1
L3 L1 L2
23576855/EN – 10/2017