manualshive.com logo in svg

SEW-Eurodrive EMS, Руководство по эксплуатации, Страница: 18 / 112

Поделиться
Скачать
SEW-Eurodrive EMS Скачать руководство пользователя страница 18

Safety instructions

16

Safety instructions

4

240

_10

0300

05/EN - 0

2/2

022

Operating manual [27779165/EN] - EMS modular controls

4.5

Personnel requirements

4.5.1

Qualifications

Tasks described in these instructions represent different requirements for qualifying the
person who looks after them.

⚠

DANGER

Danger if persons are inadequately qualified

Death or serious injuries
•

Have all work performed only by persons qualified for the task.

•

Inadequately qualified persons should be kept away from the work area.

Operator

The operator was briefed by the provider about the tasks assigned to him and the pos-
sible  dangers  in  the  case  of  inappropriate  behavior.  The  operator  may  only  perform
tasks that go beyond normal operation if this is specified in the instructions and the pro-
vider has expressly entrusted him with them.

Qualified electrician (see VDE 0105-100)

Due to their technical training, knowledge and experience, as well as knowledge of the
relevant standards and regulations, the qualified electrician is able to work on electrical
systems as well as recognize and avoid possible dangers independently. The electrician
is specially trained for the work environment in which he works and knows the relevant
standards and regulations.

Qualified personnel

Based on their technical education, knowledge and experience as well as knowledge of
relevant regulations, qualified personnel are in a position to perform the work assigned
to them as well as identify and prevent possible hazards independently.

Instructed persons

Instructed persons were trained by the provider about the tasks assigned to them and
possible hazards in case of incorrect behavior. In addition, these persons must have
read and understood these safety regulations and must adhere to them afterwards.
If required, this may have to be confirmed by the customer/user with a signature.

Содержание EMS

















































































































Отзывы:

Нет отзывов