manualshive.com logo in svg

SEW-Eurodrive EDR200, Руководство по эксплуатации, Страница: 7 / 272

Поделиться
Скачать
SEW-Eurodrive EDR200 Скачать руководство пользователя страница 7

1

General information

Rights to claim under limited warranty

Operating Instructions – EDR..71 – 315, EDRN63 – 315

7

Meaning of the hazard symbols

The hazard symbols in the safety notes have the following meaning:

Hazard symbol

Meaning

General hazard

Warning of dangerous electrical voltage

Warning of hot surfaces

Warning of automatic restart

EX

Note on explosion protection

Warning of explosions

1.2.3

Structure of embedded safety notes

Embedded safety notes are directly integrated into the instructions just before the de-
scription of the dangerous action.

This is the formal structure of an embedded safety note:

 SIGNAL WORD

 Type and source of hazard. Possible consequence(s) if disregar-

ded. Measure(s) to prevent the hazard.

1.3

Rights to claim under limited warranty

Read  the  information  in  this  documentation.  This  is  essential  for  fault-free  operation
and fulfillment of any rights to claim under limited warranty. Read the documentation
before you start working with the product.

1.4

Product names and trademarks

The  brands  and  product  names  in  this  documentation  are  trademarks  or  registered
trademarks of their respective titleholders.

25896334/EN – 06/2019

Содержание EDR200

















































































































































































































































































Отзывы:

Нет отзывов