SEW-Eurodrive EDR200, Руководство по эксплуатации, Страница: 42 / 272

4
Mechanical installation
Terminal box
Operating Instructions – EDR..71 – 315, EDRN63 – 315
42
4.7 Terminal box
4.7.1 Turning the terminal box – tightening torques
The following table shows all the tightening torques required for this procedure:
Motor Screw/bolt Tightening torque
Nm
M6 stud [115]/[1213] 3
M8 stud 6
M12 stud 15.5
M16 stud 30
EDRN63 [113] 2
EDR..71 – 132, 315, EDRN71 –
132S, 315 [113] 5
EDRN63 [117] 2
EDR..71 – 132, EDRN71 – 132S [117] 6.5
EDR..160, EDRN132M/L 27.3
EDR..180 – 225 (aluminum),
EDRN180 – 225 (aluminum) 27.3
EDR..180 – 225 (gray cast iron),
EDRN180 – 225 (gray cast iron) 50
EDE..250 – 315, EDRN250 – 315 85
EDR..71 – 132, EDRN71 – 132S [119] 5
EDR..160 – 225, EDRN132M –
225 27.3
EDR..250 – 315, EDNR250 – 315 54
EDR..71 – 132, EDRN63 – 132S [123] 4
EDR..160, EDRN132M/L 11.3
EDR..180 – 225 (aluminum),
EDRN180 – 225 (aluminum) 11.3
EDR..180 – 225 (gray cast iron),
EDRN180 – 225 (gray cast iron) 27.3
EDR..250 – 315, EDRN250 – 315 54
EDR..71 – 132S, EDRN63 – 132S [139] 6
EDR..160 – 225, EDRN132M –
225 25
EDR..71 – 225, EDRN80 – 225 10
EDR..250 – 315, EDRN250 – 315 85
EDR..71 – 315, EDRN71 – 315 [137]/[629]/[632] 2
25896334/EN – 06/2019