SEW-Eurodrive ECDriveS ECC-DFC, Руководство пользователя, Страница: 93 / 96

Appendix B
– Configuring the PC for Ethernet subnetworks
Manual
– ECC-DFC field bus controller 93
When you click Properties, the “Internet
Protocol (TCP/IP) Properties” window
appears. In this example it has been as-
sumed that an IP address has been as-
signed to your PC by your office network.
This is also indicated by the fact that the
text fields in this window have been deac-
tivated. Select "Use the Following IP ad-
dress” and the text fields are activated
again so that entries can be made.
In this example, the value of the IP ad-
dress, the subnet mask, and the standard
gateway must be entered. Click OK so
that the settings are made. Note that a
value has been entered in the default
gateway field. This is only necessary if
your network has a specific router. In the
majority of cases, this value is the same
subnetwork as the IP address field, and
its final octet (DDD) is normally 0 or 1.
INFORMATION
Contact your IT department if you are uncertain with regard to modifying the IP
address of the PC.
If you enter values for the IP address, subnet mask, and standard gateway for
the PC under point (5), be sure to note the previous values before clicking the
button under point (6). As soon as you click “Use the following IP address” under
point (6) these values are lost!
If you have completed the communication with the network(s) and have to reset
the PC to the previous network settings, simply use the same procedure and
enter the noted-down values again.