SEW-Eurodrive ECDriveS ECC-DFC, Руководство пользователя, Страница: 29 / 96

Status displays
Manual
– ECC-DFC field bus controller 29
6.3. Motors
Indication Position LED status Description
Left motor
and right motor 2 and 3 Off Motor not running and no error found
Illuminated in
green
Connection has been established
Illuminated in
red
If motor is running: Indicates current limiting.
If the motor is in the idle state: Indicates that the motor is not
correctly connected or is running hot
Voltage supply is less than 18 V or above 30 V
Slow flashing
in red
Motor is overloaded and ECC-DFC is limiting the current in
order to lower the temperature
Fast flashing in
red Motor short circuit detected between at least two of the phase
windings
6.4. Sensors
Indication Position LED status Description
Sensors 4 and 5 Illuminated in yellow ECC-DFC starting up
Illuminated in green Sensor input activated
Illuminated in red Sensor status signal
Slow flashing in red Zone congestion or missing sensor
Fast flashing in red Network stop status
6.5. Power
Indication
Position LED status Description
Power 1 Illuminated in blue Current supply for logic and motors is con-
nected
Slow flashing in
blue Motor voltage is less than 18 V