13
ENGLISH
WARNING! Risk of injury!
The detent pin must lock into the required position.
That way, you avoid accidents and injuries.
3. Folding up the luminaire
The luminaire can be put again into its initial
position by carrying out the steps described above
in reverse order.
Installation (suspended operation)
ATTENTION!
The
ALDEBARAN
®
360 GRAD FLEX-C 2.0
requires
room / ambient air for proper operation. The luminaire
has to be installed free-standing with at least 0.5 m
space to all sides.
INFORMATION!
The luminaire can also be used in suspended
mode. This is only permitted in conjunction with
the optional accessory (
Item no.: 1410926021
).
For this purpose, the ring nut is to be used as a
fixture.
ATTENTION!
Make sure that your suspension point is designed
for the weight of the light.
WARNING! Risk of injury!
Implicitly fix the luminaire with the star grip by
tightening it clockwise. That way, you avoid
accidents and injuries.
Adjustment of the modules
(suspended operation)
The
ALDEBARAN
®
360 GRAD
FLEX-C 2.0
luminaire
has four single light modules that can be adjusted via
mechanics for the requirements of the worksplace.
Therefore, the modules can be adjusted to the re-
quired position between 0 and approx. 90° of inclina-
tion after unlocking.
1. Unlocking of the modules
Before you can adjust the inclination of the luminaire
(8-fold screening), the magnetically locked modules
need to be unlocked. To do this, grasp each individual
light module with both hands at the side and pull it
towards your body.
2. Adjusting the luminaire’s inclination (suspended
operation)
In order to adjust the required inclination, pull out the
upper detent pin and lower the luminaire to the re-
quired inclination. For fixing of the adjusted position,
the detent pin has to lock into the default hole.
WARNING! Risk of injury!
The detent pin must lock into the required position.
That way, you avoid accidents and injuries.
3. Folding up the luminaire
The luminaire can be put again into its initial
position by carrying out the steps described above
in reverse order.
Star grip
Ring nut
Picture 1 (transport mode)
Picture 2
Upper detent pin
Holes
