Sesamo LIGHT MILLENIUM, Инструкция по установке

Страница: 8 / 24

Automatism component removal
and movement
Unscrew the cover fastening screws A (if pres-
ent) and remove as indicated in the sequence
in
Fig.9 .
Remove the carriages as follows:
• Disconnect the belt fastening rod from the
carriage using the fastening screws B
(Fig.10)
• Loosen the anti-derailment device screws C
and let the roller support rod completely
lower
(Fig.10)
• Remove the carriage
To facilitate box fastening operations, the internal automatism components can be moved or removed.
WARNING
Before loosening component lock screws to move components ( Fig.11 ), measure the distance of the motor from the
head or make marks on the box for correct component positioning at the end of assembly.
Box fastening
Inspect the surface where the box will be fastened, if the sur-
face is not even, level with shims. The automatism girder may
buckle if fastened on an uneven surface.
Fasten the box to the prepared support using suitably long M8
hexagon head cap screws, inserted in the horizontal and verti-
cal slots
(Fig.12) .
8
Installation Instruction
LIGHT MILLENNIUM
Fig. 9
Fig. 10
Fig. 11
Fig. 12