Sesamo LIGHT MILLENIUM, Инструкция по установке

Страница: 11 / 24

If uneven proceed as follows:
• Loosen bolts (
Fig.16 part. A )
• Align the carriages to the automatism box
• Check alignment measuring the quotas E (
Fig.18 ) on the right
and left sides of the carriage: they must be equal.
• To further test alignment, manually move the wing: it should slide
with the minimum effort and without any type of hindrance or
friction.
• Tighten the bolts ( Fig.16 part. A ) paying careful attention not to
alter the alignment.
WARNING
Neglect to align the carriage wheels with the sliding rail may cause
excessive wear and noise during automatism use
Vertical adjustment (Pv axis)
To position the wings at the correct height and as perpendicular
as possible, proceed as follows:
• To avoid damages, make sure the anti-derailment device is
completely lowered.
• Insert a (long-handled) Allen wrench in the wheel eccentric
part. A Fig. 19 ,loosen the nut using a long-handled 24
wrench part B .
• Use the eccentric to move the wing to the required height
using the references (+and-) on the carriage and on the
eccentric part
C .
• Holding the eccentric securely in position, firmly tighten the
wheel nut making sure not to alter the chosen position.
Horizontal adjustment (Pt axis)
Its purpose is to adjust the meeting point of the two wings.
Sesamo automatisms are designed positioning components
to obtain the correct meeting of the wings at the centre of the
space. If the meeting point requires adjustment during installa-
tion, proceed as follows:
• Loosen bolts (
Fig.20) regarding the clamp on the “ pass-
ing branch ” of the belt (joint-less belt branch)
• Move the clamp on the belt to the required position.
• Firmly tighten the bolt (
Fig.20 part. A ) carefully checking
that the belt teeth are correctly inserted in the clamp hou-
sings.
Installation Instruction
11
LIGHT MILLENNIUM
Fig. 18
Fig. 19
Fig. 20