Servend MD 150 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 64

background image

7

Installation and Service Manual

GROUNDING IN STRUCTIONS

SAFETY

This appliance must be grounded. In the event of malfunction or breakdown, grounding provides a
path of least resistance for electric current to reduce the risk of electric shock. This appliance is
equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug
must be plugged into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances.

DANGER – Improper connection of the equipment-grounding conductor can result in a risk of elec-
tric shock. The conductor with insulation having an outer surface that is green with or without yellow
stripes is the equipment grounding conductor. If repair or replacement of the cord or plug is neces-
sary, do not connect the equipment-grounding conductor to a live terminal. Check with a qualified
electrician or serviceman if the grounding instructions are not completely understood, or if in doubt
as to whether the appliance is properly grounded. Do not modify the plug provided with the appli-
ance – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

WARNING – When using electric appliances, basic precautions should always be followed, includ-
ing the following:

a) Read all the instructions before using the appliance.

b) To reduce he risk of injury, close supervision is necessary when an appliance is used near

children.

c) Do not contact moving parts.

d) Only use attachments recommended or sold by the manufacturer.

e) Do not use outdoors.

f) For a cord-connected appliance, the following shall be included:

•

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

•

Unplug from outlet when not in use and before servicing or cleaning.

•

Do not operate any appliance with a damaged cord or plug, or after the appliance
malfunctions or is dropped or damaged in any manner. Return appliance to the nearest
authorized service facility for examination, repair, or electrical or mechanical adjust-
ment.

g) For a permanently connected appliance – Turn the power switch to the off position when

the appliance is not in use and before servicing or cleaning.

h) For an appliance with a replaceable lamp – always unplug before replacing the lamp.

Replace the bulb with the same type.

i) For a grounded appliance – Connect to a properly grounded outlet only. See Grounding

Instructions.

SAVE THESE INSTRUCTIONS

WARNING:

Risk of electrical shock. Connect to a properly grounded outlet only.

«
...
5
6
7
8
9
...
»

Содержание MD 150

































































Отзывы:

Нет отзывов

Похожие инструкции для MD 150

Formula Pro Advanced

Бренд: Baby Brezza Страницы: 8

Бренд: Culligan Страницы: 58

Type I CHILL-003

Бренд: BRAVILOR BONAMAT Страницы: 16

Waterways Estetica SAET310BLES

Бренд: Oasis Страницы: 9

Бренд: Live Fine Страницы: 11

Бренд: Grindmaster Страницы: 72

Бренд: DPR Страницы: 24

Бренд: Bobrick Страницы: 2

Бренд: Bobrick Страницы: 3

Multiplex MII-302

Бренд: Manitowoc Страницы: 40

Multiplex N2Fusion

Бренд: Manitowoc Страницы: 64

Streamliner DC 125

Бренд: Trico Страницы: 25

Бренд: Manitowoc Страницы: 28

Бренд: BOWMAN Страницы: 3

Бренд: Star Manufacturing Страницы: 20

Бренд: Kimberly-Clark PROFESSIONAL Страницы: 5

preeflow eco-DUOMIX450

Бренд: ViscoTec Страницы: 36

141E LFTLA141E Series

Бренд: Elkay Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды