Servend MD 150 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 64

background image

FOREWORD

Manitowoc Beverage Equipment (MBE) developed this manual as a reference guide for the owner/
operator, service agent, and installer of this equipment. Please read this manual before installation
or operation of the machine. A qualified service technician should perform installation and start-
up of this equipment, consult the

Troubleshooting Guide

within this manual for service assistance.

If you cannot correct the service problem, call your MBE Service Agent or Distributor. Always have your model and
serial number available when you call.

Your Service Agent ___________________________________________________________________

Service Agent Telephone Number ______________________________________________________

Your Local MBE Distributor ___________________________________________________________

Distributor Telephone Number _________________________________________________________

Model Number ______________________________________________________________________

Serial Number _______________________________________________________________________

Installation Date _____________________________________________________________________

UNPACKING AND INSPECTION

Note: The dispenser was thoroughly inspected before leaving the factory. Any damage or irregularities
should be noted at the time of delivery.

WARRANTY INFORMATION

Consult your local MBE Distributor for terms and conditions of your warranty. Your warranty specifically
excludes all beverage valve brixing, general adjustments, cleaning, accessories and related servicing.

Your warranty card must be returned to Manitowoc Beverage Equipment to activate the warranty on this
equipment. If a warranty card is not returned, the warranty period can begin when the equipment leaves
the MBE factory.

No equipment may be returned to Manitowoc Beverage Equipment without a written Return Materials
Authorization (RMA). Equipment returned without an RMA will be refused at MBE’s dock and returned
to the sender at the sender’s expense.

Please contact your local MBE distributor for return procedures.

«
1
2
3
4
...
»

Содержание MD 150

































































Отзывы:

Нет отзывов

Похожие инструкции для MD 150

Бренд: Halsey Taylor Страницы: 2

Бренд: GBG Страницы: 83

Бренд: Avanti Страницы: 19

arctic compact 12-20 ul

Бренд: Ugolini Страницы: 20

Бренд: diluo Страницы: 20

Бренд: Zojirushi Страницы: 15

Бренд: Excalibur Страницы: 31

Бренд: Ugolini Страницы: 32

Indispensable KCH-06076

Бренд: Honey Can Do Страницы: 8

Бренд: Manitowoc Страницы: 32

Pure Water Dispenser 100 Series

Бренд: DS Services of America Страницы: 2

Бренд: DS Services of America Страницы: 2

Pure Water Dispenser 500 Series

Бренд: DS Services of America Страницы: 2

FMD DBC-3 4-CUP

Бренд: Bunn Страницы: 4

Бренд: Perlick Страницы: 12

Бренд: CPS COLOR Страницы: 44

Aqua-Pure AP110 Series

Бренд: 3M Страницы: 2

Бренд: Ugolini Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды