Servend FlexTower 12, Инструкция по установке и обслуживанию, Страница: 26 / 40

26
Installation and Service Manual
USER MAINTENANCE
DAILY CLEANING
Splash Shield
Switch
Cleaning the grid, splash shield and drain pan
1. Turn off the on/off rocker switch located on left side
of the unit.
2. Lift the grid and splash shield to remove them from
the drain pan.
3. Using mild soap, warm water and a clean cloth,
wipe the drain pan. Then, rinse with clean, warm
water. Allow plenty of warm (not hot) water to run
down the drain of the drain pan, to remove syrup
residue that can clog the drain opening.
4. Wash the grid and splash shield, then rinse with
clean water. Place the grid and splash shield back
in the drain pan.
5. Wash all exterior surfaces of the unit with warm
water and a clean cloth. Wipe again with a clean,
dry cloth.
Cleaning the water valve nozzle and diffuser, cosmetic
nozzle and syrup injection shroud assembly
6. Remove the cosmetic nozzle, and then remove
nozzle-diffuser assembly from water valve.
7. Rinse the cosmetic nozzle and water valve nozzle-
diffuser assembly with warm, clean water.
8. Clean water valve nozzle-diffuser assembly with
soapy water and a soft bristle brush.
9. Clean the cosmetic nozzle, underside of the water
valve and the inside of the syrup injection shroud
assembly with warm, soapy water. Rinse with clean
warm towel.
10. Replace water valve nozzle-diffuser assembly and
cosmetic nozzle.
11. Turn on the on/off rocker switch located on left side