Servend FlexTower 12, Инструкция по установке и обслуживанию, Страница: 24 / 40

24
Installation and Service Manual
4 Section Area Touchpad 8 Section Area Touchpad
OPERATION
PROGRAMMING MODES
TOUCHPAD CONFIGURATION MODE
Once in program mode (5), control board LED displays (5).
Press the first and last touchpad selection areas on both
touchpads. The touchpad LED lights sequence through all
the touchpad selection areas indicating the touchpad has
been configured. After configuring both touchpads either
enter another program mode or exit the programming
modes, which will save programming mode changes.
TOUCHPAD LED LIGHT SEQUENCING MODE
(8 Selection Area Touchpad)
Once in program mode (6), control board LED displays (6).
Press the first touchpad selection areas on either touchpad
for clockwise LED light sequencing. The touchpad LED
lights sequence clockwise through all the touchpad selec-
tion areas indicating the touchpad has been configured for
clockwise LED light sequencing. Or press the second
touchpad selection areas on either touchpad for counter-
clockwise LED light sequencing. The touchpad LED lights
sequence counterclockwise through all the touchpad se-
lection areas indicating the touchpad has been configured
for counterclockwise LED light sequencing. Or press the
third touchpad selection area on either touchpad to turn off
LED light sequencing. The third touchpad area LED lights
illuminate for 3 seconds then turn off indicating the touchpad
has been configured for LED light sequencing off mode.
After configuring the LED light sequencing for touchpads
either enter another program mode or exit the program-
ming modes, which will save programming mode changes.
TOUCHPAD LED LIGHT SEQUENCING MODE
(4 Selection Area Touchpad)
Once in program mode (6), control board LED displays (6).
Press the first touchpad selection areas on either touchpad
for upward LED light sequencing. The touchpad LED lights
sequence upward through all the touchpad selection ar-
eas indicating the touchpad has been configured for up-
ward LED light sequencing. Or press the second touchpad
selection areas on either touchpad for downward LED light
sequencing. The touchpad LED lights sequence downward
through all the touchpad selection areas indicating the
touchpad has been configured for downward LED light
sequencing. Or press the third touchpad selection area on
either touchpad to turn off LED light sequencing. The third
touchpad area LED lights illuminate for 3 seconds then turn
off indicating the touchpad has been configured for LED
light sequencing off mode. After configuring the LED light
sequencing for touchpads either enter another program
mode or exit the programming modes, which will save pro-
gramming mode changes.