Serene SEREONICALERT CA-360Q, Руководство пользователя

Страница: 16 / 29

EN
Copyright 2020 Serene Group, Inc. All rights reserved. 16.
RESET (Multi-Function Button):
During alarm clock, press once will stops alarm sounds and
starts a 5-minute snooze or press for 2 seconds will stop further
snoozes.
In normal operations, press once will turn the flasher On / Off.
In battery mode, press once will turn display on for 3 seconds.
In menu setting, press once will exit the menu.
During alert alarms, press once will stop it, and reset all receivers.
Accessory low battery icon and warning message: press once
will clear the message for 12 hours, and if press for more than 6
seconds, the CA-360Q will temporarily ignore the condition until
the next accessory check-in signal is received.
The RESET button behavior under different conditions:
Special Warning Message from CA-AX
Since the CA-AX (audio sensor) is primarily associate with detecting
emergency sounds (example: fire alarms), it is important that the
CA-360Q keeps constant monitoring with the registered CA-AX.
When the predetermined period has lapsed without receiving a signal
from the CA-AX, a low-battery icon with the AX number will appear,
and a warning message will be displayed. The message can only be
cleared by the Reset button and will re-appear in 12-hours if the
alerting status has not been cleared.
Special Note when CA-360Q running as a Remote Receiver:
When CA-360Q operates as a remote receiver, it can ONLY pair to a
CA-360Q master unit and cannot pair any accessories to itself.
While the CA-360Q is in remote receiver mode, some critical system
settings will be passed down from the master unit and will not be
available to change. For normal operations, the user must perform a
system reset to convert the CA-360Q back to a master mode.
01.
02.
03.
04.
05.
06.