Serene SEREONICALERT CA-360Q, Руководство пользователя

Страница: 15 / 29

Note: The external lamp must be left in the ON position, and the
lamp must be incandescent type using less than 100 watts.
EN
15. www.sereneinnovations.com
02.
01.
Enabling alerts to unregistered CA-AX audio transmitter
Press + buttons for 2 seconds or until the unit beeps.
The CA-AX icon will display on the unitl
Repeat setp 1 above to turn off.
CA-360Q will trigger an alert for all paired/registered accessories but
you can enable the unit to trigger an alert for an un-paired CA-AX
(audio/fire alarm) transmitter. To turn this function On/Off:
02.
01.
Motion detection alerts On/Off
Press + MODE buttons for 2 seconds or until the unit beeps.
The Motion detector icon will display on the unitl.
Repeat setp 1 above to diable.
If you have a motion detector accessory (CA-MX) paired to the unit
you need to enable this feature on the CA-360Q to alert you of any
motion triggered by the CA-MX. To enable/disable motion detection:
Energy Saving Mode
Press the Light Control button (rear) for about 6 seconds.
The display will be turned off and the unit will operate in battery
mode. (with ac power attached). Press any button will cancel the
mode.
All alerting functions are active during the energy saving mode.
Connect to an External Lamp (Model CA-LX)
SEREONIC Alert CA-360Q can control an external lamp via an option-
al external lamp module (Model CA-LX, purchased separately).
User can control the lamp ON/OFF using the RESET button on top of
the unit. The operation of this lamp is synchronized with the flasher.