Serene SEREONICALERT CA-360Q, Руководство пользователя

Страница: 11 / 29

Note: CA-360Q unit will not be alarmed by the ignored accessory,
but other remote receivers will be alerted by the accessory.
EN
11. www.sereneinnovations.com
INSTALLATION Cont’d:
A new wireless sensor (example: a wireless doorbell) must be
learned (registered) into the CA-360Q unit before it can be recog-
nized.
Press and hold the
SOS/PAIR button for 6 seconds until the unit
beeps, display, and announces “ LEARN ”. This screen will show
the current accessories paired to the system.
Press and hold the new accessory's test button for about 6
seconds until the CA-360Q beeps and display the accessory
name.
While still in the learn mode, repeat step 3 above to learn another
accessory. Press the RESET button to exit when finished.
Test the new wireless accessory by pressing its test button. If
the CA-360Q sounds the alarms, the learning was successful. If
not, repeat the steps above and learn the accessory again.
01.
02.
03.
04.
05.
Pairing Sensor Accessories to the system:
This function only applies to CA-360Q in master mode.
Press and hold the
SOS/PAIR button for 6 seconds until the unit
beeps, display, and announces “LEARN” . This screen will show
the current accessories paired to the system.
Use or buttons to scroll and select the accessory you want
to ignore. Press and hold the + buttons for 2 seconds, and
the accessory name will be removed from the list.
Press the
RESET button to exit when finished
01.
02.
03.
04.
Un-Pairing or deleting Sensor Accessories from the system: