Serene SEREONICALERT CA-360Q, Руководство пользователя

Страница: 12 / 29

EN
Copyright 2020 Serene Group, Inc. All rights reserved. 12.
SETUP INSTRUCTIONS
Press the MODE button for about 3 seconds. The display will
show the available language list with the current language selec-
tion highlighted.
Use the or buttons to scroll and press
MODE again to select.
If no voice speech is preferred, select Off from the list. The
speech icon with an “X” will be shown for no voice announce-
ments.
If there are remote receivers in the system, the remote receiver.
language will be updated as well.
01.
02.
03.
Voice Announcement Language Selection
Press SOS button once on top of the unit. Verify that alert
outputs (speaker, voice, flasher, shaker and alert icon display)
lasts for about 45 seconds, then stops.
Pressing the
RESET button will stop the alert.
Verify that the flasher can be toggled ON and OFF using the
RESET button.
01.
02.
03.
Quick Self-Test
Use the or buttons to select 12/24 format, then press MODE.
Use the button to change the hour, and the button to change
the minutes. The hours and minutes will continue to scroll when
you press the buttons.
Press
MODE or RESET button when finished. Clock is set.
01.
02.
03.
Set the Clock
You can turn OFF the clock display by pressing the button
for 2 seconds or until you hear a beep.
When the clock display is off you can Press the button once
to display the date and press it again to display the time
momentarily.
To enable the clock display again, press the for 2 seconds or
until you hear a beep.
01.
02.
03.
Clock Display ON/OFF
Press the (UP) button for 2 seconds to start.