Serene SEREONICALERT CA-360Q, Руководство пользователя

Страница: 10 / 29

EN
Copyright 2020 Serene Group, Inc. All rights reserved. 10.
INSTALLATION
Install four AA size rechargeable NiMH batteries in battery
compartment at bottom of unit. (Batteries not provided)
Warning: Do not use regular batteries, as charging of regular
batteries can cause batteries to leak and damage to the unit.
01.
Land Line Telephone Connection:
Connect an analog telephone to the PHONE OUT jack on the
back.
Connect a telephone cord to the LINE IN jack on the back of the
unit.
01.
02.
Place a call to the telephone number corresponding to the
connected telephone line.
Verify that all alerting outputs are triggered - display icon, flasher,
ring tone, and bed shaker (if connected) – Answer call while the
telephone is ringing.
Verify that by answering the call (from any telephone), all alerting
outputs stop.
03.
04.
05.
Plug AC adapter into outlet and connect the plug to the unit.
Connect bed shaker to
SHAKER-1 output jack. Bed shakers are
sold separately.
Press the
button to set the volume (speaker icon).
Verify the “M” indicator is shown. Default is master mode.
02.
03.
04.
05.
Note: The CA-360Q will operate without batteries, but installing
batteries is highly recommended to continue system operations in
case of a power outage.
Telephone