SEON Explorer EX8Plus Mobile, Инструкция по установке и эксплуатации

Страница: 73 / 104

Configuring the DVR
700-0048 R003 3–35
3.2.11.5. Loading the Previously Saved Settings
This step will load the previous settings saved to the USB memory device onto the
DVR.
To load the previously saved settings:
1. Insert the USB memory device.
2. Press the
MENU
button.
3. Turn the
JOG
wheel to highlight
SYSTEM
and press the
ENTER
button.
4. In the
IMPORT DEFAULTS
menu, press the
ENTER
button.
The Import Defaults popup menu appears, as shown in Figure 3-16.
5. Turn the
JOG
wheel to select
CURRENT
to export the currently used settings.
6. Press the
ENTER
button to import.
The screen will display, “
LOAD
.....…” then “
SUCCESS
”.
OR
Press the
MENU
button to exit the process.
7. Press the
MENU
button twice to exit out of the main menu.
3.2.11.6. Formatting the Hard Drive
Before formatting an existing hard drive, you may wish to create an archive file
using the HD Reader. For more information, see the
HD Reader User’s Guide,
document part number 700-0036.
If a new hard drive is being used in the EX4 DVR, it should first be reformatted.
Any new hard drive that is incompatible will format automatically.
To format the hard drive:
1. Make sure a hard drive is installed and locked.
2. If necessary, press the
STOP
button to stop recording.
Wait five seconds for the DVR to stop recording and the
REC
button is not
illuminated.
Figure 3-16
Import defaults popup menu
Important:
The hard drives supplied by Seon Design are pre-formatted to work in the
EX4 DVR.