SEON Explorer DX-HD, Руководство пользователя

Страница: 53 / 66

Maintenance, Troubleshooting, and Service
700-0190 R003 5–1
C
HAPTER
5
Maintenance, Troubleshooting, and Service
This chapter provides information on maintenance, troubleshooting procedures, and returning product
for service.
5.1. Maintenance Tasks
To do this… What to do
Synchronizing the
DVR Clock
If the system does not have a GPS sensor, synchronize the DVR clock
every six months to ensure accurate video recording of the time and date.
For setting the time and date, see the DX-HD DVR Installation Guide
700-0189.
Clean the front cover,
cable cover, and DVR
The DVR, front cover and cable covers are made from 18 gauge steel,
coated with an outdoor powder paint, and only require periodic cleaning.
To clean, use a damp cloth with a mild detergent. Do not allow water into
the holes.
Clean the camera and
window
Refer to the product documentation for cleaning the camera.
Replace the fan filter Check the fan filter for excess dirt on a regular basis, and replace the filter
when it restricts airflow. Failure to replace a blocked filter may result in
the DVR shutting down on a hot day due to inadequate air circulation.
Contact your dealer or Seon Design to obtain a replacement.
1. Remove the filter cover by gently prying it off with a small flat
screwdriver. Discard the used filter and place a new filter back into
the filter holder.
2. Push the filter cover back into the holder and snap it into place.
CAUTION: Equipment damage
Do not remove the four screws holding the fan in place. Loose components inside the unit
could cause internal damage.