SEON Explorer DX-HD, Руководство пользователя

Страница: 36 / 66

vMax Web Operation
3–10 700-0190 R003
To Search Video from an Event Marker
1. Select Event in the Search By drop down menu.
The Event Type and Event Filter menus appear, as shown in Figure 3-7.
2. From the Event type menu, select an event type.
3. From the Event Filter menu, select a filter type.
4. Select a search range start and end date and time.
5. Click Search.
The progress bar appears while the events are located on the DVR.
Table 4 Playback tab Event Types and Filter Options
Event Types Event Filters
Alarms Alarms recorded that occurred within the selected time range are listed. Options
include:
• Alarm 0-5 — as set in DVR Configuration menus, depending on DVR type
• ALL — All alarms
Signals Signals recorded that occurred within the selected time range are listed. Options
include:
• Signal 1-10 — as set in DVR Configuration menus, depending on DVR type
• ALL — All signals
System Events Telemetry events recorded that occurred within the selected time range are listed.
Options include:
• GPS — position data
• Idle — when vehicle idles for longer than configured time, the event is recorded
• G Sensor — when vehicle G Sensor data exceeds preset thresholds, the event is recorded
• Speed — when vehicle speed exceeds preset limit, the event is recorded
System events recorded that occurred within the selected time range are listed.
Options include:
• Ignition — when vehicle ignition is engaged, the event is recorded
• Recording — DVR is recording
• Timers — as configured, when vehicle actions exceed preset timer ranges the event is recorded
• Video Loss — when any camera is not detected, the event is recorded
ALL — all recorded telemetry and system events that occurred within the selected
time range are listed