SEON Explorer DX-HD, Руководство пользователя

Страница: 17 / 66

DVR Operation
700-0190 R003 2–5
2. Use the trackball mouse (right-click) to access the DVR’s configuration, playback, and archiving
menu settings as required.
3. Proceed to the Configuration or Operation and Playback chapters for details on available setting
options.
Table 2-1 On-Screen Display Information
Feature Description
Camera 1 to Camera 12 Camera titles, maximum 8 characters each.
Main_Title Main title of the DVR, maximum 32 characters.
HD_Size Formatted size of the dual HDD cartridge, in gigabytes (GB).
HD_Used Percentage of recorded video on the dual HDD cartridge. At 100%, the message displayed
depends on the Repeat Record settings in the Recording Settings menu.
• When Repeat Record is set to On, the HD Used message reads “N/A Repeating”. N/A
means that information on how much of the hard drive space is used is not available
because the hard drive is full. Repeating means the DVR continues recording,
overwriting the oldest recorded data.
• When Repeat Record is set to Off, the HD Used message reads “100%”. The DVR
stops recording.
Camera Off Indicates how long the cameras will record after the DVR powers down. Configured as
Record Delay-Off time from 0 seconds to 30 minutes
Version DVR firmware version. To update, see Firmware Updates, on page 4–2.
Status DVR operation status:
• LIVE (live mode not recording)
• PLAYBACK (the DVR is playing locally, displays RECORD, ALARM or TIMER)
• RECORD (normal recording)
• ALARM (alarm recording)
• TIMER (timer recording)
• V. LOSS (video loss or camera signal loss)
Speed Display Vehicle speed and units (MPH, KPH).
Voltage System voltage from 8 to 32 VDC.
Temperature DVR temperature in degrees Fahrenheit or Celsius.
GPS When GPS display is enabled in the menus and the receiver is installed, the vehicle’s
latitude and longitude is displayed.
Time and Date Current/recorded time and date.
AC (Alarm count) Count of alarm(s) triggered. Resets to 0 when the DVR is restarted.