Installation Manual of HD-TVI Speed Dome
23
Protective Foam
Sticker
Notch
Lower Dome
Back Box
Figure 3-14
Disassemble the Speed Dome
3.
Install the toggle bolts.
1)
Remove the toggle from the toggle bolt.
2)
Insert the bolts into the screw holes on the dome.
3)
Rotate the bolts through the screw holes.
4)
Reinstall the toggles as shown in Figure 3-15.
Toggle
Bolt
Figure 3-15
Install the Toggle Bolts
4.
Align the toggle bolts with the screw holes on the ceiling.
5.
Push the dome to the mounting hole on the ceiling.
6.
Rotate the bolts again. The toggle will automatically rotate down to secure the dome to the
ceiling.
Ceiling
Toggle
Figure 3-16
Install the Dome to the Ceiling
7.
Secure the lower dome to the back box with three screws as shown in Figure 3-17.