Installation Manual of HD-TVI Speed Dome
4
2.2
DIP Switch Settings
2.2.1
5-inch Speed Dome Settings
The DIP switch is used for setting the address and baudrate for the speed dome, with value ON=1
and OFF=0.
The SW1 switches from the first to the eighth are used to set the address. The SW2 switches are
used to set the baudrate.
The default dome address is 0. The default baudrate is 2400.
The speed dome is self-adaptive to the Pelco-P, Pelco-D and Private-Code. You do not have to
set the RS-485 control protocol by the DIP switch.
1
2
3
4
5
6
7
81
2
DIP Switch
Figure 2-4
DIP Switch Settings for 5-inch Outdoor Speed Dome
1
2
3
4
5
6
7
8
1
2
DIP Switch
Figure 2-5
DIP Switch Settings for 5-inch Indoor Speed Dome
Figure 2-6
Enlarged View of DIP Switch
