SENSTAR FiberPatrol FP400, Руководство по эксплуатации продукта, Страница: 18 / 76

FP400 configurations
Page 18 FP400 Product Guide
FP400 fiber drop points
In the standard configurations, fiber drop points to access dark fibers for other perimeter
applications are possible at end module enclosures which include a single end module. The
enclosure’s second cable port can be used to connect an auxiliary device such as a CCTV
camera. The dark fibers that will be accessed should be expressed through the start module
enclosure.
Figure 14 illustrates this concept. For sites which require additional dark fibers or
additional drop locations, Senstar can supply multi-tube fiber cable. To use these larger diameter
cables also requires the use of larger splice enclosures and some additional components. Contact
Senstar for information about using multi-tube fiber cable with the FP400 system.
Figure 12 Two processor closed loop configuration (8 zones)
Figure 13 Single zone closed loop configuration (minimum splices)
S
E
S
S
E
E
S E
S E
E = end modules
S = start module
S
processor
Z1
Z2 Z7
Z4
Z8
Z6 Z3
Z5
FP400
processor
FP400
S E
E
S E
FP400 processor
max. lead-in cable = 20 km
max. detecting cable = 300 m
fusion splice
start module
end module
splice enclosure
fiber pig tails