Sensors & Software LMX200 Series, Руководство пользователя

Страница: 54 / 133

Line Scan
54
If the line number is white (Figure 6-1), Press Start to enter data acquisition. All data collected
will be saved under this line number.
If the line number is shown in red (Figure 6-2), you will see the data preview on the right side of
the screen. If it’s a long line, only the last part of the data will be shown. From this screen, you
will have the following options available:
•
View
–
press this button to load the currently displayed line. Longer lines will take a few
extra seconds to load.
•
Delete
– pressing this will delete the line. It will prompt you to confirm before deleting.
When using the LMX200, there is a MapView button at the bottom of the Line Scan screen. The
details of the MapView button are explained in
Section 9 .
Figure 6-2: Line Scan mode, showing a line that was previously collected (a) LMX200 on left, (b) LMX200 Enhanced
on right. The LMX200 has the MapView option on this screen.
Figure 6-3: When the button showing the line number is pressed, this screen allows the user to directly input the line
they wish to go to