Sensors & Software LMX200 Series, Руководство пользователя

Страница: 42 / 133

Tools & Setup
42
Figure 4-19: Odometer Calibration
– select a distance and then press Start
Upon completion, it displays the screen in Figure 4-20 (left image). You can either accept the
new value by pressing Accept, or revert back to the previous value by pressing Reject. If the
new value is significantly out of range, the test will fail Figure 4-20 (right image).
The odometer calibration value is stored in the Display Unit. If the Display Unit is changed, or
swapped out, you will need to run the Odometer Calibration test again.
Figure 4-20: Results of successful Odometer Calibration (Left). Image on Right shows a failure, as calibration is out
of range
4.2.7 GPS
The GPS test will ensure that the system is communicating properly with the GPS and receiving
data (Figure 4-21).