Sensors & Software LMX200 Series, Руководство пользователя

Страница: 97 / 133

Transferring Data to a PC
97
11 Transferring Data to a PC
Data can be exported to a PC by inserting a USB drive into the USB port (Figure 11-1).
Figure 11-1: Insert a USB memory stick into the USB port on the Display Unit to export data.
Once the USB drive is recognized, a message will appear telling you that a drive has been
inserted and if you wish to export your data to it (Figure 11-2). Click
Yes .
Figure 11-2: When a USB drive is connected to the Display Unit, a message opens asking if you would like to export
all your data to it. Select Yes to transfer immediately. If you select No, you can export the data later by going to the
Setup > File Management menu option.
If there are grids that were collected, but not processed, it will alert you after you select Yes to
exporting the data (Figure 11-3). This is important, as unprocessed grids will not automatically
show up in EKKO_Project as depth slices (you will need an additional module to view them)
–
see Section 11.6.
USB-memory
stick