Sensors & Software LMX200 Series, Руководство пользователя

Страница: 89 / 133

MapView
89
•
Pressing the +/- buttons under Zoom will zoom the image accordingly. Alternatively, you
can also press the +/- buttons in the top right of the screen. To reposition the image in
the middle of the screen, simply swipe the screen until the image is positioned properly.
•
Pressing LineView will take you to LineView display (Figure 6-4). It will always take you
to the highest line number for that project.
•
Pressing Options will display the screen shown in Figure 9-4 allowing you to customize
the layer view. This is explained in the section below.
To reposition the image at any time, simply swipe the screen until the image is positioned
properly.
9.2.1 Options (Layer views)
Pressing the Options button will allow you to customize what is shown in the MapView display.
The screen will be split between the Layer options on the left and the MapView display on the
right (Figure 9-4).
Figure 9-4: Setting layer options in MapView
Press the ON or OFF button beside each option to show or hide that particular feature on the
display on the right. Alternatively use the Up and Down arrows on the 4-way directional keypad
to select the desired feature, then press the
Toggle button on the bottom of the screen to turn
that feature on or off.
Each layer feature is described below:
•
Scale Lines
– controls the display of the background grid lines. These are used as a
scale reference.
•
Flags
– controls the display of flags
•
Interpretations
– controls the display of all interpretations