Sensorex TX2000, Руководство по эксплуатации

Страница: 8 / 50

2.4 Assembly of electrode and housing
2.4.1 Cable set-up
a.
Make sure to remove the conductive rubber or aluminum-foil layer between the electrode signal
wire and the coaxial shield.
b. Extend the cable to the transmitter without any joint except specific junction box. Connect the
transparent coaxial inner directly to the Glass terminal on the back of transmitter, and metal
connect coaxial shield to Ref
.
terminal.
2.4.2 ,QWHQWLRQDOO\OHIWEODQN
Set-up diagram of coaxial cable:
See the correct set-up method on the left:
Note: The black conductive rubber
covering on the coaxial inner should be
removed.
Metal coaxial shield
Transparent coaxial inner
(Remove the conductive rubber)