8 | SR 2020-D
Putting the SR 2020-D into operation
Putting the SR 2020-D into operation
Preparing the transmitter for use
You can set up the SR 2020-D transmitter on an even surface or mount it into a 19" rack.
Note:
Do not fit the rubber feet when rack mounting the transmitter.
Setting up the transmitter on an even surface
To ensure that the transmitter cannot slip on the surface on which it is placed, four self-ad-
hesive soft rubber feet are supplied.
CAUTION
RISK OF STAINING OF FURNITURE SURFACES!
Some furniture surfaces have been treated with varnish, polish or synthetics which might
cause stains when they come into contact with other synthetics.
Despite a thorough testing of the synthetics used by us, we cannot rule out the possibility of
staining.
Do not place the transmitter on delicate surfaces.
Ensure that the base of the transmitter is clean and free from grease before mounting the
rubber feet.
Fix the rubber feet to the base of the transmitter by peeling of the safety paper and fitting
them as shown in the diagram.
Connecting the antenna
Connect the telescopic antenna to the antenna output
12
at the rear of the transmitter.
To obtain the best possible radiation power:
Align the antenna vertically.
2
12
Содержание SR 2020-D -
Страница 1: ...SR 2020 D Instruction manual ...