10 | SR 2020-D
Putting the SR 2020-D into operation
Mounting two SR 2020-D side by side
Place the two transmitters side by side upside-down onto a flat surface.
Align the jointing plate
15
over the holes in the bottom sides of the transmitters.
Secure the jointing plate
15
to the transmitters using eight of the supplied recessed head
screws (M 3x6).
Hook the two rack mount “ears”
14
to the front panels of the transmitters.
Secure the rack mount “ears”
14
to the transmitters using two of the supplied recessed
head screws (M 3x6) respectively. If you wish to mount the antenna connections to the
front of the rack, use the rack mount “ears” of the optional GA 3030 AM antenna mount.
Slide the transmitters into the 19" rack.
Secure the rack mount “ears”
14
to the rack.
14
14
15
Mounting only one SR 2020-D
When mounting only one transmitter into the rack, use the blanking plate
13
instead of the
second transmitter.
Hook the two rack mount “ears”
14
to the front panel of the transmitter.
Secure the rack mount “ears”
14
to the transmitter using two of the supplied recessed head
screws (M 3x6) respectively.
Secure the blanking plate
13
to one of the rack mount “ears”
14
using two of the supplied
recessed head screws (M 6x10).
If you are not front mounting the BNC output connector, insert the two blanking plugs
16
into the holes of the blanking plate.
Slide the transmitter into the 19" rack.
Secure the rack mount “ears”
14
to the rack.
Содержание SR 2020-D -
Страница 1: ...SR 2020 D Instruction manual ...
