12 | SR 2020-D
Putting the SR 2020-D into operation
Connecting a condenser microphone
The microphone input of the SR 2020-D transmitter is exclusively designed for use with con-
denser microphones. Suitable microphones are listed on page 5.
Connect the condenser microphone to the XLR-3F socket
9
of the transmitter.
2
9
Connecting the headphones
The
Mic/Line
level display
2
displays the strength of the input signal (see page 7). The
SR 2020-D transmitter also features a headphone output for monitoring purposes.
CAUTION
DANGER OF HEARING DAMAGE!
Listening at high volume levels for long periods can lead to permanent hearing defects.
Use the headphone volume control (
VOL
)
2
to set the volume for the connected head-
phones to the minimum before putting the headphones on.
To monitor the audio signal via headphones:
Set the headphone volume control
2
to the lowest volume by turning it to the left as far as
possible.
Connect headphones with a ¼" (6.3 mm) stereo jack plug to the headphone output
1
.
Put the headphones on.
Gradually turn up the volume.
2
1
Содержание SR 2020-D -
Страница 1: ...SR 2020 D Instruction manual ...
