5
Non coprite l'apertura del microfono
con il nastro biadesivo.
Collegate il connettore jack del microfono alla presa del microfono
.
Collegate l'alzatelefono da remoto alla base
Collegate mediante l'apposito cavo di connessione la presa ACCESSORIES sulla base di DW
800 e BW 900 alla presa
dell'alzatelefono da remoto. Il LED
si illumina cinque volte di
blu, una volta collegata la base alla rete elettrica.
Premete il pulsante di aggancio sulla base per testare l'HSL 10. La levetta deve muoversi.
Fissate l'alzatelefono da remoto al telefono
Nota!
Il nastro adesivo per il montaggio
può essere utilizzato una sola volta. Rimuovete la
pellicola protettiva del nastro adesivo per il montaggio solo quando avrete trovato la
corretta posizione per il fissaggio, come segue:
A cornetta abbassata tenete l'HSL 10 tra telefono e cornetta, ovvero il più vicino possibile
all'altoparlante della cornetta del telefono.
Per verificare se la posizione dell'HSL 10 è corretta, premete il tasto di aggancio sul vostro
dispositivo mobile, ovvero sulla base. La posizione è corretta solo se il dispositivo di
sgancio
solleva il lato della cornetta con l'altoparlante e se sentite il segnale di linea
libera.
Fissate l'HSL 10 con il nastro adesivo per il montaggio.
2c
3
1
Binder2.pdf 37
16.06.2006 14:07:03
Содержание HSL 10
Страница 2: ...Binder2 pdf 2 16 06 2006 14 07 00 ...