Sennheiser HSL 10, Инструкция по эксплуатации

Страница: 10 / 93

8
If problems occur…
Problem Possible reason Remedial measures
When pressing the hook
button on the mobile
device or base station, you
do not hear a dial tone in
your headset. The lifting height is not
sufficient. Adjust the lifting height (see page 6).
The HSL 10 microphone inlet
does not face the phone
loudspeaker. Re-position the HSL 10 so that the microphone
inlet faces the phone loudspeaker. Although your phone is
ringing, you cannot hear
the ring tone in your
headset.
HSL 10 does not recognize
the ring tone. Teach the ring tones of your phone to the HSL 10
(see page 6).
You hear a ring tone in
your headset when
another phone is ringing. The HSL 10 is not adjusted
to the ring tone of your
phone. Teach the ring tones of your phone to the HSL 10
(see page 6).
The phone handset slips
off the lifting pad. The lateral extension of the
lifting pad is too short. Replace the lateral extension of the lifting
pad (see page 7).
You terminate the call on
your headset, but your
phone is not hung up. There is not contact
between the phone handset
and the phone hook button. Affix the foam block to the phone hook
button, so that the phone handset pushes
down the phone hook button (see page 7, picture
5). If the foam block is too big for the phone hook
button, cut the foam block smaller.
8
5
Binder2.pdf 10 16.06.2006 14:07:00