![background image](http://html.mh-extra.com/html/sennheiser/hsl-10/hsl-10_instruction-manual_1242882008.webp)
6
Adjusting the lifting height
Press and hold down for two seconds both the “P2” button
and the “P1” button
. The
LED
alternately flashes red and blue.
Release the buttons. The lifting pad raises to the currently adjusted height.
Increase or decrease the lifting height by pressing the “P2”
(
decrease) or “P1”
(
increase) button until you can hear the dial tone.
Save the settings by pressing and holding down for two seconds both the “P2” button
and the “P1” button
.
Teaching the ring tones of your telephone to the HSL 10
You can teach two different ring tones to your HSL 10. This is required if
•
your telephone supports two different ring tones, e.g. for external and internal calls,
•
you hear a ring tone in your headset although not your telephone, but another telephone in
the vicinity is ringing,
•
you can not hear a ring tone through your headset even your telephone is ringing.
Teaching ring tone 1:
Set your telephone to ring tone 1. Make sure that ring tone 1 differs from the ring tones of
other telephones in the vicinity.
Adjust the ring tone level to comfort.
Press and hold the “P1” button
until the LED
flashes blue.
7
6
6
6
Binder2.pdf 8
16.06.2006 14:07:00
Содержание HSL 10
Страница 2: ...Binder2 pdf 2 16 06 2006 14 07 00 ...