Sennheiser Digital 9000, Инструкция по эксплуатации, Страница: 77 / 130

Digital 9000 | 75
Using the EM 9046
“ ch ” operating mode – Configuring channels
In “ ch ” operating mode, you can configure channels. Some of the settings
that can be made can be synchronized via infra-red between the receiver
and the transmitters. These settings are marked with a in the
col-
umn (see also next page).
In “ ch ” operating mode, you can also select channels for headphone mon-
itoring. To do so, proceed as described on page 83.
Overview of the “ ch ” menu
Main menu “Channel setup” Page
Frequency
Selects a frequency preset or
sets the frequency manually
76
Name Enters a channel name 77
CMD mode
Configures audio and com-
mand outputs
77
Ch standby Mutes the channels 78
Encryption
Binds the audio signal to the
receiver and protects against
eavesdropping
78
RF level rec
Records the antenna signals
and the diversity evaluation
79
Transmitter
setup Calls up the extended menu
“
Transmitter setup ”
– –
Extended menu “Transmitter setup” Page
Channel
setup Calls up the main menu
“
Channel setup ”
–
RFmode
Adjusts the transmission
mode
81
Gain
Adjusts the transmitter’s
input gain
81
Low cut
Sets the transmitter’s low-cut
filter
81
Display
Selects the transmitter’s stan-
dard display
82
Lock
Activates/deactivates the
transmitter’s lock mode
82
AF source Displays the microphone head
(SKM)/audio source and cable
emulation (SK) 82
Cable
Emulates different instrument
cable lengths (SK)
82