Sennheiser Digital 9000, Инструкция по эксплуатации

Страница: 108 / 130

Cleaning and maintaining the Digital 9000 system
106 | Digital 9000
Cleaning and maintaining the Digital 9000
system
왘
Disconnect the products from the mains. Remove the rechargeable bat-
teries or batteries before cleaning.
왘
Only use a soft, dry cloth to clean the products.
Cleaning the sound inlet basket of the microphone head
왘
Unscrew the upper sound inlet basket from the microphone head by
turning it counterclockwise (see diagram).
왘
Remove the foam insert.
There are two ways to clean the sound inlet basket:
• Use a slightly damp cloth to clean the upper sound inlet basket from
the inside and outside.
• Scrub with a brush and rinse with clear water.
왘
If necessary, clean the foam insert with a mild detergent or replace the
foam insert.
왘
Dry the upper sound inlet basket and the foam insert.
왘
Reinsert the foam insert.
왘
Replace the sound inlet basket on the microphone head and screw it
tight.
You should also clean the contacts of the microphone head from time to
time:
왘
Wipe the contacts of the microphone head with a soft and dry cloth.
Cleaning the contacts of the SK 9000 bodypack transmitter
왘
Wipe the contacts with a dry cloth.
CAUTION
Liquids can damage the electronics of the products!
Liquids entering the housing of the products can cause a short-circuit and
damage the electronics.
왘
Keep all liquids away from the products.
왘
Do not use any solvents or cleansing agents.