Sennheiser Digital 9000, Инструкция по эксплуатации

Страница: 69 / 130

Digital 9000 | 67
Using the EM 9046
Via the “ Brightness ” menu item, you can adjust the brightness in 8 steps.
This also adjusts the brightness of the LED lighting.
Extended menu “ Service setup ”
To get into the extended menu “ Service setup ”:
왘
In “ sys ” operating mode, turn the jog dial until “ Service setup ” appears.
왘
Press the jog dial.
The extended menu “
Service setup ” appears.
To change from the extended menu back to the main menu:
왘
Turn the jog dial until “ System setup ” appears.
왘
Press the jog dial.
You are back to the main menu “
System setup ” of the “ sys ” operating
mode.
In the extended menu, you can adjust the following settings:
“Factory reset” – Resetting the receiver to the factory defaults
Via the “ factory reset ” menu item, you can reset your receiver to the fac-
tory default settings. To do so, follow the prompt on the main screen to
press the
button
F
for 5 seconds.
The following menu items are reset to their factory default settings:
Menu Menu item Factory default setting Page
Main menu
“
System
setup ”
Output level 0 dB 63
Word clock 96 kHz 64
Network |
name of the network EM9046_1 66
Network |
IP settings Auto 66
Brightness Medium level 66
Extended
menu
“
Service
setup ”
Date & time |
selected time zone Amsterdam, Berlin, Bern,
Rome, Stockholm, Vienna 68
Factory reset
factory reset