Sencore MRD 7000, Руководство пользователя

Страница: 45 / 126

MRD 7000
– User Manual
Page 45 (126)
3.2.1.9 Configuring HLS Input
When HLS Input is selected as the active input, clicking on the gear icon allows the user
to configure HLS Input using the pop-up configuration box.
Setting Range Description
Receive Enabled
Disabled
This setting allows the user to enable or
disable these input stream settings.
Physical
Connector
Eth0
Eth1
The physical connector on which to receive
the HLS traffic.
HLS Mode Pull Sets HLS to receive through a network
location.
HLS Network
Location XXX.XXX.XXX.XXX or
URL Defines address of the HLS stream to be
received.
Decryption Mode Disabled
AES128
Defines if a decryption of the received
signal is needed, AES 128 standard
Decryption Key User Entry Provides the key to allow signal processing
if decryption is to be done
Discovery Timeout 0 (infinite)
1
– 100 (seconds)
Defines the length of time to wait for the
stream to be discovered