Sencor SMP 5004 PRO, Руководство пользователя

Страница: 7 / 28

EN 7
EN
Revision 08/2017 Copyright © 2017, Fast ČR, a. s.
General instructions
1. General instructions
USB connector, notes on using the unit
USB memory device must be inserted directly into the unit. To
prevent data transmission failure or its interference, do not use
USB extension cables.
Electrostatic discharges may cause the unit to malfunction. In
such an event, the user must restart the unit.
Before using a USB memory device, test its ability to
communicate with the unit, its data reading and writing speed.
To achieve maximum reading speed we recommend that you
keep disk space defragmented. Use FAT32 or NTFS fi le system,
single partition and without protection. If reading and writing on
the USB memory device is not continuous, undesirable effects
may occur such as partial image loss (distortions/checkering
effects) or complete image loss, audio defects, and in extreme
cases the operation will be stopped. Unexpected behaviour of
the connected fl ash drive, or the presence of viruses or other
damaging software may cause the functions of the appliance to
stop working, necessitating a restart.
The USB connector is the standard type and is not able to
power a USB device with a high power usage (e.g. hard disk
drives HDD). Use devices with independent power supplies and
power them from their own power supplies.
The appliance was designed to achieve maximum compatibility
with memory devices. With respect to the variety of devices
on the market, it is not possible to guarantee compatibility with
every USB device. In the event of diffi culties, try formatting the
memory device directly in the appliance. If problems persist,
use a different memory device.