Sencor SMP 5004 PRO, Руководство пользователя

Страница: 10 / 28

10 EN
EN
Revision 08/2017 Copyright © 2017, Fast ČR, a. s.
Remote control
3.1 Programmable zone
The remote controller’s programmable zone allows you to store
5 buttons/functions of another remote control (such as for a TV
set).
Button programming procedure:
1) Hold down the programmable zone’s on button on
the remote controller (wait until the on button’s colour
indication changes from fl ashing to solid light state).
2) Press the programmable zone’s button you want to
program (the programmable zone’s on button will start
fl ashing).
3) Aim the sensors of both remote controllers against each
other (from a distance of no more than 5cm) and press
another unit’s remote controller button whose function
you wish to store in the selected button of the remote
controller’s programmable zone.
4) Successful storing will be confi rmed by a solid light of the
programmable zone’s on button.
5) Continue in the same manner to setup other
programmable area buttons. To exit the programming
mode of the programmable zone buttons, wait a couple
of seconds until the programmable zone on button’s colour
indication goes fully out.
Attention: Due to the variety of devices on the market, the
compatibility with all remote controllers cannot be guaranteed.