Sencor SMP 5004 PRO, Руководство пользователя

Страница: 20 / 28

20 EN
EN
Revision 08/2017 Copyright © 2017, Fast ČR, a. s.
Factory settings
6. Factory settings
If your unit has been set to an undesired state which
prevents normal use, the easiest way to restore the
operation is to reset the unit to its factory settings.
The unit can be set to the original “factory” settings. First, make
sure you have all your required fi les backed up outside the unit.
This function will reset all content including the unit setup to
the default state and this action cannot be undone. In menu, go
to Settings, then select the “Storage and reset” tab and choose
“Reset to default settings”. To complete the factory settings,
confi rm “Reset to default settings” and then “Delete all”.
7. Troubleshooting
Warning
Under no circumstances should you attempt to repair the device
yourselves – this will constitute a breach of warranty conditions.
Do not open the device as there is a risk of injury by electric
shock. If the device malfunctions, fi rst check the following list of
problems and their solutions. If you are not able to remedy the
fault with the help of the following tips, contact your vendor.