Sena HelloDevice Pro PS110 Скачать руководство пользователя страница 2

Страница: 2 / 109

Copyright Information

Sena Technologies reserves the right to make any changes and improvements to its product without

providing prior notice.

Trademark Information

HelloDevice

™

is a trademark of Sena Technologies, Inc.

Windows® is a registered trademark of Microsoft Corporation.

Ethernet® is a registered trademark of XEROX Corporation.

Notice to Users

Proper back-up systems and necessary safety devices should be utilized to protect against injury,

death or property damage due to system failure. Such protection is the responsibility of the user.

This device is not approved for use as a life-support or medical system.

Any changes or modifications made to this device without the explicit approval or consent of Sena

Technologies will void Sena Technologies of any liability or responsibility of injury or loss caused by

any malfunction.

Technical Support

Sena Technologies, Inc.

210 Yangjae-dong, Seocho-gu

Seoul 137-130, Korea

Tel: (+82-2) 573-5422

Fax: (+82-2) 573-7710

E-Mail: [email protected]

Website: http://www.sena.com

Содержание HelloDevice Pro PS110














































































































Результаты поиска

Содержание HelloDevice Pro PS110

Отзывы:

Похожие инструкции для HelloDevice Pro PS110

Бренды по названию

Популярные бренды

Sena HelloDevice Pro PS110, Руководство пользователя

Результаты поиска

Содержание HelloDevice Pro PS110

Отзывы:

Похожие инструкции для HelloDevice Pro PS110

Бренды по названию

Популярные бренды